2/2/2010 - Battery Lease Project profit margins

Battery Lease Project & profit margins

At present battery-leasing Kokak klic-5001, Kokak klic-7001 operation of the project location is the ideal number of larger secondary schools, colleges, vocational colleges, large living quarters, other places ineffective.

Business location ideal location is the school district or school dormitory in front of snack shop, stationery shop. Although the project belongs to a low investment and quick returns, the state environmental fast track approach advocated by the project, but those who invested 10,000 yuan irresponsible advertising that 200,000 yuan annual interest is purely deceptive.

China is the battery production and consumption of power Kokak klic-7004, Kokak cr-v3, each year 18 billion batteries production. However, our current management of used batteries in the blank, each of the battery scrap recovery of less than 2%.

Leasing the battery using nickel-metal hydride batteries, to overcome some shortcomings of ordinary batteries, the way of leasing the battery from the fundamental solution to the problem of pollution. According to market trends, leasing the battery market development potential.

Investment Analysis: 10,000 yuan invested enough, theoretical annual income 6 million to operate the battery lease will only need three elements: a large battery charger, Ni-MH battery, battery exchange points. About 10,000 yuan of investment can be started to carry out services. With the development of business, you can always increase the charger and rechargeable batteries.

With 1 million yuan Investment calculation, with a 600-type charger, 5 # and 7 # Ni-MH rechargeable batteries, a total of 2000.

Charger is the same time each time a large rechargeable battery charger 600, can be developed 1500-2000 simultaneous users. 2000 Battery for the development of 750 users, continue to increase, the development into the 1500 user, need to increase the battery 2000, which means canon bp-511, canon nb-2l the need for additional investment of about 7,000 cells.

(Note: ads advertising company 1 money is only available to those 1200 batteries, and that can only be provided by the charger while charging more than 100 battery charger is only a day, three shifts a maximum of 300 only the battery, remove the back third of the battery, the maximum available only for 300 students rented. five dollars per month income, also 1,500 yuan, even the costs are not enough, can not be profitable, let alone non – income of 200,000 yuan a year.) 5 # AA battery price is 3.9 yuan each, 7 # AAA each 3.1 yuan. In addition, investors need to prepare rented convertible point of money. We advocate the development of a number of locations suitable shops, cooperation is good, also do not advocate the beginning of time to buy sufficient quantities of batteries, with business development and then added as well.

Expenses (in terms of development to the 1500 user computing)

Assumed equipment 600 charger, the charger for 1500 users, each user leasing two batteries, coupled with working batteries 1000, a total battery 1500 × 2 +1000 = 4000 Zhi, AA: AAA batteries ratio assuming 1:1, that is, AA2000 branch, AAA2000 branch.

Charger and battery depreciation

Charger can be two years, the rechargeable battery 500 times, about two years canon nb-2lh, canon nb-4l, casio np-20, then the charger and battery amount of the monthly depreciation: 17000/24 months = 708 yuan.

Charging electricity

Equipment, power 240W, each rechargeable battery 600, three times a day 1800, daily consumption of 0.24 × 24 = 5.76 degrees, one dollar per unit of electricity, the daily power consumption 5.76 yuan, the monthly power consumption for the 5.76 × 30 = 173 Yuan. (Full load calculation according to the above calculations, the actual lease withdrawn from circulation due to cell cycle is not fixed, the cost should be lower than the above calculations) to pay rent or exchange points of hard to find suitable shops charge per month to 2,000 yuan or less hard costs of the conversion , and other unpredictable costs 900 yuan per month is expected.

Start-up battery leasing project benefits Dell Latitude D800 Battery

Monthly income:

6 yuan per month rental fee per household, 1500 to: 1500 × 6 = 9000 Yuan.

Income = operating income – total cost = 9000-708-173-2000-900 = 5219 yuan. Annual income: Annual income = monthly income × 12 = 5219 × 12 = 62628 Yuan deposit receipts minimum deposit of 10 yuan per person charge, according to 1500 people, the deposit may be casio np-100, minolta np-600, Sony np-f970 charged 15,000 yuan.

Namely: a deposit in advance investment income can be recovered can be used for further development of liquidity.

Expose some of the battery rental chains lie

1, the vast majority of companies engaged in leasing the battery would give you an account balance, saying that 10000 students can develop 4 1000 tenants, who can earn 3.8 yuan for each student a month earn 15000 a year on the earn more than 180,000. We tell you, do not be fooled. Experience has shown that 10000 students can only develop to more than 1,300 students rented, assuming that each student who can earn 3.8 yuan, in January will only make more than 4900, more than 59,000 yuan a year that is not possible to make a 180,000 or more. Another point is that you have every student who can not make 3.8 yuan, because the cost is higher than 1.2 Yuan.

2, four thousand people who calculate the development of the company to conceal a basic fact that they provide battery chargers and 1200, up only for more than 400 users, is absolutely impossible for the four thousand service. In other words, you have to do as they say there are “4 1000″ Users, then you have to spend more money to them to buy charger and battery, you do not know that they would “slaughter” you how many times.

3, when calculating the costs of those companies intentionally Sony np-bg1, nikon en-el3, nikon en-el4 reduce the size of the usual costs to give you a false impression that every student who costs only 1.2 yuan. Experience has shown that, together with rental shop or commission paid to cooperative exchange points, with each student were to cost 2.5 yuan. In other words, you may be a month from each student who gains is 2.5 yuan.

4, those companies are best when the calculation of income, it is difficult to do. Because any one project, and its customer base are slowly developed, and developed into the ideal number of customer base, take a very long time.

Paper-thin to be able to fold the new super-cut “paper batteries” come

Can you imagine printed on paper produced by the battery do? You can think of that one nikon en-el4a , olympus li-10b day humanity can do, like print newspapers, “printing” production batteries? U.S. scientists at Rensselaer Polytechnic Institute have developed a thin piece of paper can be cut, can be folded light “paper battery.”

According to reports, this new battery of “viability” superpower, both bear the high temperature of 150 degrees Celsius, but also can withstand minus 70 degrees Celsius.

In this regard, the United States Kumar, Rensselaer Polytechnic Institute researchers explained: “We are using a ionic liquid as the electrolyte. It is noteworthy that the liquid does not contain water, which means that no amount of material within the battery will freeze or evaporate . because there is no water, this paper energy storage devices to withstand extreme temperatures. ”

Not only “viable” super, this  Dell Latitude D830 Battery a greater ability to both can be used as high-energy battery, you can also play a role in supercapacitors. Compared with conventional batteries, this battery provides long-lasting and stable power can also be like a super-capacitor as quickly burst out of a very high energy.

Rensselaer Polytechnic Institute Professor Lin Hate the U.S. Robert said: “It is essentially an ordinary paper, but it is made by a very intelligent way of … … the carbon nanotubes (as electrode) embedded in paper, the electrolyte infiltrated in the paper. The end result is a kind of seems, feels as well as paper weight with the same equipment. ”

Professor Lin Hate said that this battery can be folded, they could get bent olympus li-12b, samsung sb-lsm160, you can also cut into any shape without affecting the function. Therefore, this battery can be made into a variety of shapes, such as car doors can be made as to provide power for the vehicle. This will help to promote research and development of electric vehicles.

If such a “paper batteries” stack up like a newspaper, it would immediately have some big breakthroughs. As the light weight, this battery can be ideally applied to small electronic devices, implantable medical devices, automotive, aircraft and even ships.

More importantly, in the absence of electrolyte case, the human blood or digital camera battery sweat or even can “activate” the battery, so the  Dell inspiron 1545 battery can be applied to pacemakers and other medical equipment on.

Not only the wide range of uses, this battery is also environmentally friendly, because it is made of paper, “physique”, non-toxic substances, therefore, unlike conventional batteries, as an environmental hazard.

However, despite the material to manufacture such cells are not expensive, but researchers have not yet developed a large-scale production of this battery-economic methods.

Mulugesang researchers say their ultimate goal is, like the printing press as “printing” to produce the “minolta battery , minolta np-200 battery paper battery.”

This post is via: http://netbook-battery.com/battery-lease-project-profit-margins/

2/2/2010 - The EU green barriers set up 3rd Avenue

The EU green barriers set up 3rd Avenue – Toshiba Battery

China Machinery and Electronic Products is facing its toshiba pa3400u 1brs , toshiba pa3450u 1brs biggest export market, the EU’s third wave of green barrier test, August 11, the EU’s EuP Directive for the EU member states formally translated into laws and regulations. It is the second of two green directives RoHS and WEEE, the EU set up the third “green barriers.”

Third Wave “green test” is harder

Prior to the EuP Directive, in 2006, the EU has implemented the RoHS ( “Electrical and Electronic Equipment Directive restricting the use of Certain Hazardous Substances”) and WEEE ( “Waste Electrical and Electronic Equipment Directive”), two green directives. They were once the domestic industry, the focus of attention. Experts believe that directive EuP Directive No. 3 Road, the response is far more difficult than the first two instructions.

From the EuP Directive’s full name can see that this Road “green barrier” — the weight of “eco-design of Energy-using Products Framework Directive”, Zhejiang Institute of Standardization engineer, said Jiang Jianping, in addition to passenger transport vehicles, cargo toshiba pa3451u 1brs , toshiba pa3465u-1brs, all energy-using products are the products it covers.

EuP Directive is the core of eco-design concept, making it the most comprehensive instructions environmental requirements. Jiang Jianping, said, EuP directive require product design at the beginning, we must package solution, from design, materials selection, manufacturing, transportation, installation and maintenance until the waste this “life” in environmental issues.

EuP Directive is also suspected of trade barriers, but also the barriers to entry much more discreet. Jiang Jianping said that technology is relatively backward, a relative shortage of funds difficult for developing countries to achieve their standards. EuP Directive is a framework directive sets out the general principles, while the specific implementation details should be categorized, according to different products tailor-made. Therefore, the EU can first of more competitive, a greater impact on the local industry, imports of products developed and implemented measures to improve the technical standards. Moreover, the instructions have been developed for the implementation details, than to re-specify the new directive is much easier to fast.

Can not be ignored “time poor” toshiba PA3176U-1BRS , toshiba PA3178U-1BRS , toshiba PA3191U-1BAS

Jiang Jianping told reporters, EuP is so broad, high demand can be described as unprecedented, it will seriously affect our electrical and electronic industry and related industrial development and exports.

However, the momentum of the EuP directive also threatening to leave the “time difference.” Jiang Jianping said that, since it belongs to Framework Directive, there is currently no specific product category, put forward the eco-design requirements, the EU will be gradually introduced product-specific EuP directive supporting measures. Heating and hot water equipment, electronic motor systems, lighting systems in homes and commercial premises equipment, home appliances, office electric products, personal electronics, ventilation and air-conditioning systems will become a concrete implementation of the EuP Directive’s first products.

Zhejiang Economic and Trade Commission Technical Progress and Equipment Division Engineer Zhu Tao told reporters that, as EuP Directive is not specific details, so they are to enhance the publicity of enterprises, but many companies find it not the same as before the two commands are the starting point, and therefore that not a big problem, but until the introduction of specific rules to deal with them will be very tight.

Jiang Jianping warned, EuP Directive require product with CE (European integration) certification mark, many of the domestic mechanical and electrical companies have done the previous CE certification, but the EuP directive came into effect, CE certification is bound to introduce toshiba PA3191U-3BRS , toshiba PA3285U-1BAS , toshiba PA3285U-1BRS eco-design, relevant content, therefore, enterprises The new CE certification costs will be higher. He estimated that the directive had been completed before the commencement of CE-certified companies can not once and for all, the EU may be required to obtain a new EuP directive in line with CE certification.

The different attitudes of domestic enterprises

Yongkang City, Zhejiang Province, China Superman Group is the world’s fourth largest manufacturer of electric shavers. Vice President of Technology Group, Celestica said Kim, who has set up a EuP directive response team, the key research in the design of response measures to achieve energy-saving environmental protection, eco-design. “EuP Directive will inevitably increase production costs, but market share, compared with the European Union, we value the latter.

This post is via: http://laptop-battery.mobi/the-eu-green-barriers-set-up-3rd-avenue/

2/2/2010 - Nokia announced a recall of mobile phone batteries

Nokia announced a recall of mobile phone batteries

Mobile phone maker Nokia, 14 toshiba pa2487ur , toshiba pa3107u, issued a statement announced that due to batteries overheating, it will recall 46 million mobile phone batteries.

Which “BL-5C” battery is Japan’s Matsushita Electric in December 2005 to November 2006 production.

Nokia pointed out that the paragraph charging the battery may be due to short-circuit and overheat; amongst the 100 cases reported, but no one was injured.

Nokia BL-5C battery release the product this book Toshiba Battery

Nokia today announced on December 2005 to November 2006 for the period from Matsushita Battery Co., Ltd. produced by the Nokia-branded Nokia BL-5C battery product this book. The product this book does not apply to any other Nokia-branded batteries.

Nokia found that in very rare cases, the product this book marked the Nokia-branded BL-5C battery charging may be due to short circuit and overheat, causing the battery to shift. Nokia and Matsushita are in close cooperation with the departments concerned, to investigate this situation.

Several Nokia BL-5C battery suppliers,  Dell Inspiron E1405 Battery producing a total of more than 300 million BL-5C batteries. This book applies only to inform the company by Matsushita from December 2005 to November 2006 during the production of 46 million BL-5C batteries. With regard to reports of overheating worldwide is about 100 onwards, and have not yet had any serious personal injury or property damage were reported.

Use this book involved in this BL-5C battery user should note that all of the approximately 100 cases were reported occurred in the battery charging. Nokia believes that the phenomenon does not affect other uses for mobile phones.

Although in this particular period of time Panasonic BL-5C toshiba pa3107u 1brs , toshiba pa3166u-1brs , toshiba pa3191u 1brs batteries produced by the charge appears overheated extremely rare, the user may request this book, the product marked BL-5C battery replacement.

Please note that not all Nokia products use the BL-5C battery, but this applies only to this book a small part in the use of the Nokia BL-5C battery, which is very important.

How to identify the relevant time period Panasonic BL-5C batteries produced by Dell Latitude D410 Battery

In order to identify the battery is apply to this book, you need to remove the battery from the fuselage. Nokia BL-5C batteries in the battery printed on the front with “Nokia” and “BL-5C” words. The battery on the back above the Nokia logo on the bottom there are 26 characters from the battery identification number. With this identification code, can determine whether the battery by Panasonic in December 2005 to November 2006 were manufactured. Comply with the conditions of this product this book for free replacement battery.

About BL-5C toshiba pa3191u 5brs , toshiba pa3285u 1brs Battery

BL-5C batteries used in Nokia products, 14 kinds of cells in a model. As with other parts, like Nokia’s batteries are manufactured by a number of offers, including the BL-5C batteries. Panasonic is the Nokia BL-5C batteries produced several suppliers.

Nokia’s global initiative to recall 46 million mobile phone batteries Panasonic products

Nokia announced yesterday, because there is the risk of overheating, will take the initiative in the global recall of 46 million cell phone batteries.

Nokia said that these models “BL-5C” batteries from Matsushita Electric in December 2005 to November 2006 production. Nokia found that in very rare cases, “BL-5C” battery charging may be due to short circuit and overheat, and cause the battery to dislodge. At present the company has received 100 cases of overheating in the global report, but so far there were no injuries were reported. “BL-5C” battery is Nokia’s most widely used battery, Panasonic and other vendors for a total of three toshiba pa3331u 1brs , toshiba pa3356u 1brs Nokia produced more than 300 million “BL-5C” batteries.

Attachment: using the recalled batteries Nokia phone models are:

Nokia 1100, Nokia 1100c, Nokia 1101, Nokia 1108, Nokia 1110, Nokia 1112, Nokia 1255, Nokia 1315, Nokia 1600, Nokia 2112, Nokia 2118, Nokia 2255, Nokia 2272, Nokia 2275, Nokia 2300, Nokia 2300c, Nokia 2310 , Nokia 2355, Nokia 2600, Nokia 2610, Nokia 2610b, Nokia 2626, Nokia 3100, Nokia 3105, Nokia 3120, Nokia 3125, Nokia 6030, Nokia 6085, Nokia 6086, Nokia 6108, Nokia 6175i, Nokia 6178i, Nokia 6230, Nokia 6230i, Nokia 6270, Nokia 6600, Nokia 6620, Nokia 6630, Nokia 6631, Nokia 6670, Nokia 6680, Nokia 6681, Nokia 6682, Nokia 6820, Nokia 6822, Nokia 7610, Nokia N70, Nokia N71, Nokia N72, Nokia N91, Nokia E50, Nokia E60

Sony Li-ion  Dell Latitude D400 Battery plant in Singapore will invest 150 million Singapore dollar, put into production in August next year,

Sony lithium batteries in Singapore will invest 150 million Singapore dollar plant. The plant will begin operations in August next year.

Sony said in a statement, the plant is fully commissioned in 2010, will employ about 500 workers. Factory production of lithium batteries will be used for mobile phones and notebook computers.

Sony to build cell phone battery factory in Singapore planned August 2008 production

Sony this week said it would two to build cell phone battery plant in toshiba pa3356u 3brs , toshiba pa3383u Singapore to meet the growing global expansion of mobile consumer market.

According to Australian media reports, the family lithium battery factory plans to put into operation in August 2008 is expected to up production in 2010 could reach 8 million Clear group. The plant Sony plans to invest 97.24 million U.S. dollars.

Sony’s site plan is located in Singapore Tuas industrial zone in the old site, this is the first time in its battery production in Southeast Asia. Sony said that with the advent of the global high-performance mobile phone constantly, the demand for high-capacity batteries are also growing. It is estimated that more than half of the lithium batteries will be used in cell phones.

Li Yuan Hsin-tsai: power battery-propelled increase in performance of the outbreak of Dell Latitude D630 Battery

● company’s business revenue foam stability, and the introduction of new pricing will remain stable after the gross margin is expected to achieve 2007 revenue 546 million yuan, in 2008 549 million yuan; in 2009 623 million yuan;

● additional project power battery profits are good, nickel-hydrogen batteries is expected to be completed in 2008 income of 325 million, completed the battery in high temperature of about 290 million yuan of income, the traditional nickel-cadmium batteries will also have a certain increase is expected in 2008 to achieve 191 million yuan of income ;

● the rapid growth of hybrid, driving demand for nickel-hydrogen toshiba pa3383u 1brs , toshiba pa3384u 1brs , toshiba pa3395u 1brs batteries, the future co-operation with Toyota is expected to enter through the HEV market;

● cordless power tools of European and American countries have become increasingly demanding, such as electric drills, lawn mower, cordless vacuum cleaner Dengjun appeared trend, increasing demand on battery power.

● Based on the above assumptions made in the company’s profit forecasts. Expects 2007 earnings per share were 0.228 yuan to achieve; 2008 0.488 yuan; 2009 0.581 yuan;

● Based on the above analysis, the company estimated the price range was 17.07 ~ 20.04, we recommend buying toshiba pa3399u 1brs , toshiba pa3399u 2brs .

This great post is via: http://batterynews.us/nokia-announced-a-recall-of-mobile-phone-batteries/

2/2/2010 - EDM graphite materials application FAQ

EDM graphite materials application FAQ

EDM in the field of large number of users Kokak klic-5001, Kokak klic-7001 in the application of graphite electrode materials are still a lot of doubts. On the one hand due to long-term use of traditional copper allows users to have their customary sexual and psychological dependence, and partly because of their milling or the practical application of EDM lack of experience.

60s in the last century, copper is widely used as an electrode material, the utilization rate about 90%, graphite only about 10%. Today, however, this situation has changed in Europe, more than 90% of the electrode material is graphite. Copper, which has been dominated by electrode materials Dell Latitude D430 Battery, and its advantages compared to graphite electrodes is almost gone. What led to this dramatic change? EDM industry in recent years to prove: this change due to the many advantages of graphite electrodes.

This article will explain the process of EDM graphite materials

Kokak klic-7004, Kokak cr-v3, may encounter some problems, and we hope that through this you can unlock your doubts on the graphite material.

A graphite material is dangerous?

EDM graphite is used instead of synthetic products of natural graphite, synthetic graphite must go through a lengthy production process to manufacture high-tech shape, there is no radiation! . According to the specifications of different products to generate process usually ranging from four to seven months. In the production process, the graphite to high temperatures up to 3000 degrees Celsius for processing. Such a high temperature so that most of the impurities are volatile, and thus the purity of graphite up to 99.99% (100ppm). This means that one million products, there is only 100 impurities, and these impurities was again divided into a variety of elements, is difficult to trace Midao canon bp-511, canon nb-2l,. Some special applications require even less than the purity graphite 5ppm. As a result, in the product manufacturing and mold making is rarely a completely pure natural raw materials production.

For the milling operation employees who work in the dust environment is indeed a danger. If this is a very small dust are inhaled into the lungs, respiratory tract damage will, therefore, confined nature of the machine is very important. Now used for graphite machining, high-speed milling machines are equipped with sealing device and dust collector, these are the standard machine tools, as long as the maintenance properly, do not have to worry about dust brings harm.

2 working hours will be broken fin?

According to the tests, found that if an incorrect or unreasonable use of the

canon nb-2lh, canon nb-4l, cutting method, cutting parameters, and not suitable for graphite machining tool, often result in broken ribs.

From the process technology point of view, graphite and copper can not be compared because it completely using different processes. For example, the amount of feed per knife larger the tool wear is smaller. In addition, the metal material processing diametrically opposite, in graphite machining, with the increase in cutting speed, tool wear but significantly reduced.

This case, we mainly use the diamond or diamond-coated cutting tools. In use at the same time, people also need to note that many different metal material processing rules. Dell Latitude D500 Battery Under normal circumstances, the introduction of companies such as software, machine control systems and automation systems, a new process every time, generally staff training. But the only way to convert the graphite copper processing time, very few companies provide them with training opportunities. Therefore, many materials with graphite instead of copper EDM manufacturers, this early attempt from the beginning he had already died.

3 to spend more time learning about the application?

The acceptance of new things usually take time. How to treat a relatively casio np-20, casio np-100, minolta np-600, new topic of graphite materials, one must change one way to think about, and there may also need to re-design process some of the process technology to match. But more important point is to take all these measures can give us a tremendous cost savings of space, but also can greatly shorten the molding cycle – EDM graphite electrode efficiency is 2-3 times that of copper, while the cutting efficiency is 3-5 times that of copper.

From the global market point of view, if someone still able to continue to 20 years ago, the operation of the European mode of production, and in Asia and Eastern Europe, a place to compete successfully in the case, then he’s certainly very unique product. Otherwise, no improvement to the old case of the production process is bound to catch up by others. Graphite is such a way to make people want the desire to reduce costs Dell Latitude D520 Battery quickly possible excellent electrode material.

Many users will be followed by use of a graphite electrode materials, reduce the number of half. This will produce what kind of results?

⑴ electrodes required for the electrode clamping fixture greatly reduced.

⑵ needs to be installed to reduce the number of electrodes.

⑶ only need a small amount of zero setting for Sony np-f970, Sony np-bg1, nikon en-el3.

⑷ electrodes measured the workload greatly reduced.

⑸ the amount of material used to make electrodes greatly reduced.

⑹ cutting cycle significantly shortened, and the corresponding also reduces electrode wear. Use of copper electrode, a cavity to be more than only the electrodes, if replaced by graphite, then the electrode can be more than the previous combination of an electrode. In this way, the current through the electrodes can increase, not only improve the processing efficiency and also reduces electrode wear.

⑺ cutting speed significantly higher than that of copper material

4 copper is cheaper than the graphite material?

This sweeping statement not based on facts, it is because people tend to ignore both the fact that different measurement methods. Copper is measured in kilograms, while the graphite material is usually calculated in terms of volume. In the conversion process, one nikon en-el4 , nikon en-el4a should also consider the density of a variety of electrode materials. Due to the recent international market, copper prices have sharply risen to around 60 yuan per kilogram (early in 2005 copper price is only 30 yuan per kilogram from top to bottom), the graphite material itself has been relatively lower than the price of copper, and copper is non-renewable resources, Prices will be more expensive. If, there are people who want to buy a cubic decimetre (about 9 kg) of copper, then he would have to pay about 540 yuan. At this price, people already have access to more high-quality graphite products, regular grade graphite is even more affordable price. In the calculation of cost-optimized graphite and copper prices is certainly a factor, efficiency and product quality is more important, previously mentioned in the graphite material has the characteristics and in the application can play is the key, specific conditions will be referred to in the post-text.

5 storage or transport of graphite fins prone to fracture Dell Latitude D600 Battery?

This statement is certainly correct, but the phenomenon is certainly inadequate? If the fin electrodes during transport, which occurs due to improper handling of broken, people will immediately find this situation and immediately aware of electrode damage occurred. If using a copper, the fin will be treated in undue bending. Whether people are able to quickly discovered the flaw it is very doubtful. If there is no timely detection and people continued to use this root electrode EDM, then the cavity, or damage to the workpiece on the inevitable.

If a graphite electrode rib fracture occurs, then people can decide whether the particular circumstances to re-milling a new electrode. The electrode at higher prices can also be connected to the (glue) A section of graphite, and then this period of re-milling, and to use a section break olympus li-10b, olympus li-12b, samsung sb-lsm160 to re-create into a single-electrode.

6 copper surface quality can be achieved to reach the standard?

A few years ago, it is also possible that the processing part of graphite surface quality can only be achieved VDI18. But now the situation has shown that graphite materials processing workpiece surface quality can be achieved VDI12 or higher level. Of course, this standard does not address all of the graphite material, or using the traditional situation of EDM machine tools, such as crude or conventional graphite graphite can not meet this standard. To obtain such a surface quality, all kinds of graphite materials, production conditions must be to achieve the best fit condition. In this case, the electrode size, process, and graphite types of choices are key factors will play a decisive role. However, the important point is that the graphite material can be used to achieve a very fine surface Dell Latitude D810 Battery quality.

Many EDM equipment manufacturers and graphite materials, manufacturers have done a lot of efforts. Today, they can provide customers with graphite processing of specific processing equipment and processing parameters. Moreover, the graphite manufacturers are also exploiting their more refined graphite brand to meet customer demand.

However, the most important factors is that people must choose fujitsu T4215 Battery , fujitsu T4220 Battery , fujitsu T5010 Battery for equipment manufacturers and graphite manufacturer. Much fuss over the situation often occurs, for example, some customers will be selected in order to carry out sample processing of the most complex parts, and then go to where the test equipment manufacturers processing. This type of parts in the customer’s product categories accounting for up to 1%. If the equipment and technology are used as criteria, then there is no doubt that there would be a problem: 99% of other conventional processing of the how to do?

Therefore, the usual selection of equipment should be to meet 95% of the product range is appropriate. The rest of the product range can be entrusted to other good businesses to do special processing, or use a repeated use of the electrodes. In this case, we can take to extend the discharge time, or, if necessary, apply copper electrode method.

7 Graphite can be used with the copper Dell XPS M140 Battery under the same bias?

In theory, the answer is yes. However, we do not recommend. Because of the particular thermal properties of copper it can usually choose the next bias. Graphite can withstand higher energy, it should adopt the next larger deviations. Thus significantly decreased the relative loss. Because people can use graphite milling out of a very small fin, the corresponding, choose the next larger deviations may also be realized.

8 graphite increased loss recovery process? sony vgp-bps9 , sony vgp-bps9/b , sony vgp-bps9/s

This may be a problem. However, customers are often referred to, after discharge, the “security dimension” is still able to meet customer requirements. Typically, the graphite material loss increases in the occurrence tend to occur in the processing of the case of small electrode; and people will acquire the habit of the recovery process after the repair work directly on the material. In fact this approach is wrong. Discharge after processing, but also through a polishing process, which is working procedure generally do not need to spend a long time.

Should be noted that there is such a question: If the part is always present from 0.01 to 0.02 mm of the margin, can we join the electrode compensation in the amount Dell XPS M1530 Battery of programming so that you can put in place a process without the need for recovery processing.

9 wire cutting graphite slower than copper?

In this view is correct, because the graphite melting point higher than that of copper more than it more difficult to be processed. However, to note that most of the related industries – such as graphite manufacturers, device manufacturers and production lines manufacturers already begun sony vgp-bps9a , sony vgp-bps9a/b to address this problem. People can use the latest equipment (such as laser processing, high-pressure water jet) process of qualified products. If we use the wire cutting principle, we advise clients to use fine particles of graphite products and significantly reduce the flushing pressure, especially for the thin muscle electrodes. With coarse particles compared to the product or conventional products, fine particles of graphite product-line cutting process to provide greater security and feed rate.

However, the actual situation, now how many graphite electrode EDM processing it through? Number of electrodes can be used the first 4-5 axis high speed milling machines to process. If you have no other way, then one can also use copper electrode, previously said that, even in the mold industry is very developed in Europe, the graphite is not 100 percent utilization rate, any kind of thing has advantages and disadvantages.

10 Conclusion Dell XPS M1330 Battery

In addition to the above-mentioned advantages, the graphite also has the following advantages:

⑴ processability good (to comply with operational rules and the premise).

⑵ high thermal stability (heat distortion does not occur).

⑶ light weight (for processing equipment) hp 530 battery , hp 540 battery , hp 550 battery

⑷ do not have to burr (for automated systems essential to this point).

⑸ extension coefficient is low (temperature changes in small).

⑹ able to cater for a variety of processing conditions to provide the best choice (coarse particles and fine particle graphite)

⑺ on the market also provides an electrode Dell XPS M1730 Battery can be used (ie, graphite products have been processed, you can immediately apply to EDM).

With many new technological developments, the use of graphite materials is a continuous learning and optimization process. The key is to give the relevant staff to participate in training opportunities in order to realize their potential. The face of fierce international competition, only the continuous optimization of business processes and innovative processes in order to survive. Today, graphite products already have a corresponding environment. Have emerged on the market not only for coarse particles hp 500 battery , hp 510 battery , hp 520 battery , fine particles with good-quality graphite products and graphite products a perfect match with the new cutting equipment, in addition, graphite milling cutter with a professional is also at your fingertips.

This article is via: http://batteryblog.us/edm-graphite-materials-application-faq/

2/2/2010 - BYD use small cell build great car

BYD use “small cell” build “great car”

August 9, the first high-class cars BYD F6 off the assembly line aspire 5000 battery , aspire one battery , btp 60a1 battery, while BYD Auto of Shenzhen have also built a modern production base. In June of this year, BYD F3 has sold over 10 million units, the completion of new production base and new product off the assembly line, indicating that BYD will be triumphant in the automotive field.

■ 329 Tian to build a new base in Acer Battery

“To build 1 million square meters production base of the mountains took only 329 days”, which is BYD Group President Wang Chuanfu in the new car off the assembly line and the base of the dedication ceremony, repeating a phrase several times. It is understood that BYD Auto, based in Pingshan Pingshan Town inspiron 1545 battery , Longgang District, more than 180 million square meters of construction land, the entire project is expected to total investment of 4.3 billion yuan in the end will have an annual output of 200,000 cars and a full range of models developed capacity, but also the future of BYD headquarters. At present, including the “four process” (stamping, welding, painting, assembly) production areas, including a project has been completed end of the year will be fully operational.

Wang Chuanfu said the end of this year, a project will be put into operation an annual production capacity of 100,000 vehicle production capacity, since Beijing BYD Auto will form a mold base, vehicle manufacturing base, Xi’an, Shanghai and Shenzhen Ping Shan entire acer batcl50l , lcbtp03003 , travelmate 2300 battery R & D Center car manufacturing base of the scale, enterprise development will enter the fast way.

■ It is the hope and anxiety F6

F3’s “turned out to” Let’s BYD in the auto industry emerge, but “a model go it alone,” the situation has been to make the trade for the future development of BYD’s anxiety. This year in July, F3 sales and prices have declined, which allow people to start looking forward to BYD effort to build a high-class cars to the impact of the F6, because the F6 the success of a direct impact on the future development of BYD .

Information, F6 is currently equipped with 2.0-liter and 2.4-liter two kinds of displacement, sub-manual and automatic models. Which a 2.4-liter models equipped with the Mitsubishi 4G69 Europe IV emission standards for engines and engine management systems, Delphi acer 2300 battery , travelmate 4000 battery, 0-100 km acceleration time of less than 10 seconds. According to the site BYD insiders, F6 will be available in October, is expected to price at 15 million.

Reporter closer look at the scene placed in the F6, shape and interior as a whole followed the F3’s style, but in some local details of the rough around the edges. But no matter how the face of car length 4.85 meters, Lexus ES350 front shape of the F6, because of its shoulders the burden is too heavy, we can not but it expressed concern about the future market performance.

■ “a small depot” big ambitions Dell Inspiron 1525 Battery

“By 2015, BYD Auto to achieve a single brand first in the country in 2025 BYD Auto to achieve a single brand in the world,” This is Wang Chuanfu shouted at the release ceremony of “rhetoric” and let the presence of All the industry surprised. At present, BYD F3 cumulative sales of only 10 million units, undercapacity 200,000, while the distance Wang Chuanfu objectives to be achieved, and only 8 years and 18 years, 18 years to achieve in the world, how some “idiot” However presario v5000 battery , presario x1000 battery, Wang Chuanfu it very seriously.

Itself is a battery of experts, and by making the battery started to Wang Chuanfu has its own set of ideas. In his view, the development of enterprises should be three key factors: price, quality and efficiency. Zaochu first-class quality products to ensure the cheapest price, but also has high efficiency of product development, such enterprises will become invincible, BYD will have these three elements.

For example, he said: “In the automation of production Dell Inspiron 1526 Battery processes, the BYD weaker than the Japanese, low efficiency, about 20%, but in the mold manufacturing sector, the BYD 400% higher than Japanese companies.” He also revealed that former BYD need to develop a mobile phone dies 3 months, and now need only 10 days, in the mold manufacturing process, production efficiency and manufacturing costs, BYD has the incomparable advantage of the domestic automobile manufacturers, which are the cornerstone of success BYD .

■ battery technology to build cars of the Kingdom

Battery technology is to support Wang Chuanfu to achieve the presario r3000 battery , presario v2000 battery , presario v4000 battery ideal of a more important support points.

Wang Chuanfu said the battery manufacturer BYD already “technical surplus”, there are a lot of technology was no place, and these advanced “surplus technology” will show off their capabilities in the automotive manufacturing field.

For example, he said, BYD has been developed iron battery, than the current lithium batteries safer, more durable, large capacity, and are not afraid of fire power. He disclosed that BYD plans to launch in 2009 four-wheel drive E6-iron battery car, a one-time charge can travel 400 kilometers, the price is only 15 million.

Wang Chuanfu said that future cars will be energy-saving environmental protection cell cars the world, when the time to do a single brand BYD holdings first in the country is not a problem. However, the conventional automobile manufacturing core technology, short-board and sales network presario b1200 battery , presario m2000 battery and services development is the urgent need BYD can not be ignored, because, after all, competition in the market in front of the most realistic and brutal.

Not reached a new generation of lithium batteries delaying Prius

The original account to a new generation of Toyota Prius vehicles using lithium batteries, because the battery performance is not up to standard, launch date from the end of next year, postponed to early 2009 or so. Japanese automakers Toyota, because there are security concerns, so far it will be used according to conventional nickel-metal hydride batteries. Toyota did not abandon the development of a new lithium  Dell Inspiron 1720 Battery technology, according to sources, Toyota plans to launch in 2011 the station wagon version of the Prius.

Toyota behind schedule, for other hot pursuit in the post, a myriad of competitors, is indeed good news. The largest U.S. automakers General Motors, is expected to turn the situation around. GM plans to introduce plug-in SATURN Vue Green, inroads by experts optimistic about the plug-in electric presario 2100 battery , presario 2500 battery vehicle market is expected to be launched at the end of 2009.

Sailing the company raised funds will be used for battery project

Recently, Sailing Co., Ltd. non-public offering application, the author shares the China Securities Regulatory Commission issued the Audit Committee examined conditionally passed. This indicates that “sail” refinancing progress.

Sailing The Stock of the company to raise funds will be used for industrial batteries and new batteries 3 million project. Raising funds become available, will be the company Dell Inspiron 6400 Battery a significant impact on future development.

Encryption Chip ink cartridges compatible with being drowned came

As we all know, HP, Canon and Lexmark and other printer manufacturers in order to compete for the market, they sell the printer often there is little profit, and more profit is mainly achieved through the sale of ink cartridges. But in recent years “pirate cartridge,” the prevalence presario 1200 battery , presario 1700 battery of companies to these printers has brought a lot of losses, it is anticipated that an annual losses of up to 30 billion U.S. dollars.

CryptographyResearch has developed a chip that can contain a certain extent, the use of counterfeit printer cartridges. This CryptoFirewall chip can be used by the printer cartridges to Dell Latitude D420 Battery qualify.

Of course, any digital protection technologies are likely to be cracked, but the CryptoFirewall each cartridge can generate a unique code, that is, to the use of pirated cartridge, hackers have to break each new cartridge, no doubt, CryptoFirewall security version of technology is inspiron 6000 battery quite effective.

This post is via: http://acer-laptop-batteries.com/byd-use-small-cell-build-great-car/